Equipment

Cleaning Beer taps

20150720_190115

If you spent the time to make sure your fermenting equipment is sterilized, used the best ingredients you can buy and brewed the best beer to your ability.  You need to make sure your beer is severed the best you can.  Cleaning your beer taps is a must.  There really is a 2 step process to cleaning beer taps.

First you need to have a tap line cleaner like the picture above.  I clean the beer lines before hooking up a new keg.  Cleaning the lines is important because you sanitize the lines from the previous beer on tap and the force of the water will remove any crystals that form.  Anyone who has been cleaning beer lines will tell you over time beer will leave deposits in the lines that look like little crystals.

 

The second part and the part I didn’t learn until after a few kegs is that beer sludge or deposits build up in the taps too!  I was serving beer to my family and friends with beer sludge in it.  See the picture below, were the yellow circle is, with how the sludge builds up.

20150720_190246

 

Cleaning the sludge is easy.  All I do is take apart the taps, they are just a simple machine.

 

20150720_190212

 

Then I use a wire brush with hot soapy water to clean the inside.

20150720_190341

then just put the taps back together and install them in the tower.  I also notice that taps work more smoothly after being cleaned.

With this hobby the saying “Cleanliness is next to godliness”  is very true.  The cleaner the lines the better beer you will have.

You Might Also Like